Bussi adapter for programming Bosch radios

Including activation of all BOS device programming.

Allowed in connection with the Bosch software Pro_Main, Pro_Fug or Pro_Com,
the programming of the following radios:

KF88, KF168, KF428, KF458

KFS87, KFS167, KFS457, HFS87, HFS167, HFS457

HFG89, HFG169, HFG429, HFG459

FUG10R, FUG10a, FUG13R, FUG13a, FUG11b, FUG13b

FUG operating elements MBG

Connection and functionality like the no longer available Bosch adapter 86979205093

Cable assignment Bussi <-> radio device are in the service manual and can be found in the download area on Servicetools.org
 

Build to Order product approx. 1 to 2 weeks delivery time Attention! The BUSSI is delivered without a housing

Bussi adapter for programming Bosch radios

Developer execution for the highest service level

Adapter number 1

Including activation of the developer level.

Allowed in connection with the Bosch software Pro_Main or Pro_Com,
the programming of the following radios:

KF88, KF168, KF428, KF458

KFS87, KFS167, KFS457, HFS87, HFS167, HFS457

HFG89, HFG169, HFG429, HFG459

With serial number 1

Allows modification to the AFU area, KFS series with up to 1000 channels

Connection and functionality like the no longer available Bosch adapter 86979205093

Cable assignment Bussi <-> radio device are in the service manual and can be found in the download area on Servicetools.org
 

Build to order product approx. 1 to 2 weeks delivery time
The BUSSI is delivered without a housing

PR11 / MR11 service adapter for programming
Bosch PR11 and MR11 radios

PR11 devices are plugged in directly, MR11 via the enclosed cable.

Enables updating of the MR11 / PR11 trunking radios
in normal standard devices.

Power is supplied via the radio, clean generation of the 12 V programming voltage, as with the original, not as with some offered cables, simple bridging of the 8 V supply voltage, here the device does not switch cleanly into the programming mode.

TX and RX audio are available as BNC connections for testing.

Jumper for selecting reception, transmission and service mode, separate switch-on button.

The PR11 is only used as a sample and is not included.

Build to order product approx. 1 to 2 weeks delivery time

Programming cable for AEG / EADS Teledux9 and Teleregent 10 radio systems.

For use with the original DOS software

Teledux 9 BOS and EVU version

Teleregent 10 relay point

Integrated switch and function display

Including RS232 cable

Programming cable for AEG / EADS Telecar 10 radio systems.

Programming cable for the AEG Telecar 10, connection between SE device and RS232 port

Note: The programming software is a DOS program and must also be started under DOS
operation under Windows or with USB to RS232 converters is technical
Reasons not possible.
We recommend an old 386 laptop that you can get for a few euros on Ebay.

Bravo 800 / 800L / 802L programming station

With this programming station you can program the pagers of the series Bravo 800, Bravo802, Motorola Alpha 4, EuroBos Troya and similar ones yourself.

                                                                         Links to the programming software at www.servicetools.org

The programming station and the connection cable are included in the scope of delivery. Software executable under Windows. Industrially manufactured professional quality with a functional guarantee!

Note:

For security reasons, the programming pins are moved into the interior of the housing before shipping. You can get inside by simply opening the cover on the station. The plug with the pins is located there, and you can simply change it. After programming, plug the pins back into the internal transport connector. This gives you optimal protection for your programming station.

The programming station and the connection cable are included in the scope of delivery.

ATTENTION! SALE! THE ARTICLE WILL NO LONGER BE RE-PRODUCED!

Programming station Apollo
 

With this programming station you can program the pagers Apollo Pilot XP (AL-A28), Pilot (AL-A26), Gold (AL-A25), AL-924 as well as the pagers from EuroBos (Romeo, Romeo + and Victor) yourself.

                                                                  Links to the programming software at www.servicetools.org

Industrially manufactured professional quality with a functional guarantee!

Note:
For security reasons, the programming pins are moved into the interior of the housing before shipping. You can get inside by simply opening the cover on the station. The plug with the pins is located there, and you can simply change it. After programming, plug the pins back into the internal transport connector. This gives you optimal protection for your programming station.

The programming station and the connection cable are included in the scope of delivery.

ATTENTION! SALE! If gone, then gone.

Programming cable for Niros Pagebos RX8008

A Servicetools.org quality product

Industrially manufactured professional quality with a functional guarantee!

Simply plug into the charger, no modification required.

With DIN or antenna connector, depending on the charger

Build to order product, delivery time approx. 1-2 weeks

Charger and detector are not included.

Programming cable for AEG / EADS Telecar 9 radio systems.

Programming cable for the AEG Telecar 9, connection between SE device and RS232 port

Buid to order product, delivery time approx. 1-2 weeks

Programming cable for Storno 6000 / MC Spectro.

Strono H-RIB, connection between SE device and RS232 port

Buid to order product, delivery time approx. 1-2 weeks

Picture will follow